Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

default vlan-id

Specify a VLAN as the Default VLAN.

Syntax

default vlan-id vlan-id

To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no default vlan-id vlan-id syntax.

Parameters

vlan-id

Enter the VLAN ID number of the VLAN to become the new Default VLAN. The range is from 1 to 4094. The default is 1.

Defaults

The Default VLAN is VLAN 1.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To return VLAN 1 as the Default VLAN, use the ( default-vlan-id 1) command.

The Default VLAN contains only untagged interfaces.

Related Commands

interface vlan — configures a VLAN.