Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

fc zoneset

Create a zoneset.

Syntax

fc zoneset zoneset_name [member]

To delete a zoneset, use the no fc zoneset zoneset_name [member] command.

Parameters

zoneset_name member

Enter the zoneset name.

Enter the WWPN, FC-ID, or Alias name.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0)	Introduced on the S5000.

Example

Dell(conf)#fc zoneset test1
                                             Dell(conf-fc-zoneset-test1)#member ?
                                             WORD                    Zone Name                               
                                             Dell(conf-fc-zoneset-test1)#member

Related Commands

show fc zoneset — displays the configured and active zoneset.

show fcoe-map — displays the fabric parameters.