Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show config

Display the current ACL configuration.

Syntax

show config

Command Modes

CONFIGURATION-IP ACCESS-LIST-STANDARD
CONFIGURATION-IP ACCESS-LIST-EXTENDED
CONFIGURATION-MAC ACCESS LIST-STANDARD
CONFIGURATION-MAC ACCESS LIST-EXTENDED

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell(config-std-nacl)#show conf
                                             !
                                             ip access-list standard test
                                             remark 5 Permit traffic from XYZ Inc.
                                             seq 5 permit 1.1.1.0/24 count
                                             remark 10 Deny traffic from ABC
                                             seq 10 deny 2.1.1.0/24 count
                                             Dell(config-std-nacl)#