Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip accounting access-list

Display the IP access-lists created on the switch and the sequence of filters.

Syntax

show ip accounting {access-list access- list-name | cam_count} interface interface

Parameters

access-list-name	Enter the name of the ACL to be displayed.
cam_count	List the count of the CAM rules for this ACL.
interface interface	Enter the keyword `interface` then the one of the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

`show ip accounting access-lists` Field	Description
“Extended IP...”	Displays the name of the IP ACL.
“seq 5...”	Displays the filter. If the keywords `count` or `byte` were configured in the filter, the number of packets or bytes the filter processes is displayed at the end of the line.
“order 4”	Displays the QoS order of priority for the ACL entry.

Example

Dell#show ip accounting access-list  
                                             !
                                             Standard Ingress IP access list test on TenGigabitEthernet 0/1
                                             Total cam count 2
                                             seq 5 permit 1.1.1.0/24 count (0 packets)
                                             seq 10 deny 2.1.1.0/24 count (0 packets)