Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show isis interface

Display detailed IS-IS interface status and configuration information.

Syntax

show isis interface [ interface]

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or number information:

For Loopback interface, enter the keyword loopback then a number from 0 to 16383.
For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
For a VLAN, enter the keyword vlan then a number from 1 to 4094.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell>show isis int
                                             GigabitEthernet 0/7 is up, line protocol is up
                                             MTU 1497, Encapsulation SAP
                                             Routing Protocol: IS-IS
                                             Circuit Type: Level-1-2
                                             Interface Index 37847070, Local circuit ID 1
                                             Level-1 Metric: 10, Priority: 64, Circuit ID: systest-3.01
                                             Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
                                             Number of active level-1 adjacencies: 1
                                             Level-2 Metric: 10, Priority: 64, Circuit ID: systest-3.01
                                             Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
                                             Number of active level-2 adjacencies: 1
                                             Next IS-IS LAN Level-1 Hello in 2 seconds
                                             Next IS-IS LAN Level-2 Hello in 1 seconds
                                             LSP Interval: 33
                                             GigabitEthernet 0/8 is up, line protocol is up
                                             MTU 1497, Encapsulation SAP
                                             Routing Protocol: IS-IS
                                             Circuit Type: Level-1-2
                                             Interface Index 38371358, Local circuit ID 2
                                             Level-1 Metric: 10, Priority: 64, Circuit ID: systest-3.02
                                             Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
                                             Number of active level-1 adjacencies: 1
                                             Level-2 Metric: 10, Priority: 64, Circuit ID: systest-3.02
                                             Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
                                             --More--