System Board Video Riser: Module sensor for System
Board, device removed was asserted
|
Critical |
This event is generated when the required module is removed. |
Mezz B<slot number> Status: Add-in Card sensor for
Mezz B<slot number>, install error was asserted
|
Critical |
This event is generated when an incorrect Mezzanine card is
installed for I/O fabric.
|
Mezz C<slot number> Status: Add-in Card sensor for
Mezz C<slot number>, install error was asserted
|
Critical |
This event is generated when an incorrect Mezzanine card is
installed for I/O fabric.
|
Hdwar version err: Version Change sensor, hardware
incompatibility was asserted
|
Critical |
This event is generated when an incompatible hardware is detected. |
Hdwar version err: Version Change sensor, hardware
incompatibility (BMC firmware) was asserted
|
Critical |
This event is generated when a hardware is incompatible with
the firmware.
|
Hdwar version err: Version Change sensor, hardware
incompatibility (BMC firmware and CPU mismatch) was asserted
|
Critical |
This event is generated when the CPU and firmware are not compatible. |
Link Tuning: Version Change sensor, successful software
or F/W change was deasserted
|
Warning |
This event is generated when the link tuning setting for proper
NIC operation fails to update.
|
Link Tuning: Version Change sensor, successful hardware
change <device slot number> was deasserted
|
Warning |
This event is generated when the link tuning setting for proper
NIC operation fails to update.
|
LinkT/FlexAddr: Link Tuning sensor, failed to program
virtual MAC address (Bus # Device # Function #) was asserted
|
Critical |
This event is generated when Flex address can be programmed
for this device.
|
LinkT/FlexAddr: Link Tuning sensor, device option ROM
failed to support link tuning or flex address (Mezz <location>)
was asserted
|
Critical |
This event is generated when ROM does not support Flex address
or link tuning.
|
LinkT/FlexAddr: Link Tuning sensor, failed to get link
tuning or flex address data from BMC/iDRAC was asserted
|
Critical |
This event is generated when link tuning or Flex address information
is not obtained from BMC/iDRAC.
|
The <name> is removed.
|
Critical |
This event is generated when the device was removed. |
The <name> is inserted.
|
Information |
This event is generated when the device was inserted or installed. |
A fabric mismatch detected between IOM and mezzanine
card <number>.
|
Critical |
This event is generated when an incorrect Mezzanine card is
installed for I/O fabric.
|
Hardware incompatibility detected with mezzanine card
<number>.
|
Critical |
This event is generated when an incorrect Mezzanine card is
installed in the system.
|
The QuickPath Interconnect (QPI) width degraded.
|
Warning |
This event is generated when the bus is not operating at maximum
speed or width.
|
The QuickPath Interconnect (QPI) width regained.
|
Information |
This event is generated when the bus is operating at maximum
speed or width.
|
BIOS detected an error configuring the Intel Trusted
Execution Technology (TXT).
|
Critical |
This event is generated when TXT initialization failed. |
Processor detected an error while performing an Intel
Trusted Execution Technology (TXT) operation.
|
Critical |
This event is generated when TXT CPU microcode boot failed. |
BIOS Authenticated Code Module detected an Intel Trusted
Execution Technology (TXT) error during POST.
|
Critical |
This event is generated when TXT Post failed. |
SINIT Authenticated Code Module detected an Intel Trusted
Execution Technology (TXT) error at boot.
|
Critical |
This event is generated when the Authenticated Code Module
detected a TXT initialization failure.
|
Intel Trusted Execution Technology (TXT) is operating
correctly.
|
Information |
This event is generated when the TXT returned from a previous
failure.
|
Failure detected on Removable Flash Media <name>.
|
Critical |
This event is generated when the SD card module is installed
but improperly configured or failed to initialize.
|
Removable Flash Media <name> is write protected.
|
Warning |
This event is generated when the module is write-protected.
Changes may not be written to the media.
|
Internal Dual SD Module is redundant.
|
Information |
This event is generated when both SD cards are functioning
properly.
|
Internal Dual SD Module redundancy is lost.
|
Critical |
This event is generated when either one of the SD cards or
both the SD cards are not functioning properly.
|