Alienware 17 Service Manual

PDF

Procedure

  1. Lift the latches and disconnect the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable from the system board.
    Image: Lifting the latches and disconnecting the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable from the system board
    1. keyboard-backlight cable
    2. keyboard cable
    3. macro-keys cable
    4. latches (4)
    5. macro-keys backlight cable
  2. Remove the screws that secure the palm-rest assembly to the computer base.
    Image: Removing the screws that secure the palm-rest assembly
    1. computer base
    2. screws (16)
  3. Lift the computer base slightly and push the palm-rest assembly through the slot on the computer base to release the tabs on the palm-rest assembly.
    Image: Removing the palm-rest assembly
    1. slot
    2. palm-rest assembly
  4. Turn the computer over and open the display as far as possible.
  5. Using a plastic scribe, pry up along the edges of the palm-rest assembly.
  6. Gently lift the palm-rest assembly and turn it over.
    Image: Removing the palm-rest assembly
    1. plastic scribe
    2. palm-rest assembly
  7. Peel the tape that secures the power-button board cable to the system board.
  8. Disconnect the power-button board cable from the system board.
  9. Lift the palm-rest assembly off the computer base.
    Image: Disconnecting the power-button board cable
    1. palm-rest assembly
    2. power-button board cable
    3. latch
  10. Remove the power-button board.
  11. Remove the status-light board.
  12. Remove the keyboard.
  13. Remove the touch pad.
    Image: Palm rest
    1. palm rest

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗?
0/3000 characters
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符:<>()\