Dell Latitude E7240 Owner's Manual

Installing the Display Assembly

  1. Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.
  2. Place the display assembly onto the computer.
  3. Tighten the screws on both sides to secure the display assembly.
  4. Tighten the screw that secures heatsink to the computer.
  5. Route and connect the LVDS cables through the routing channel.
  6. Connect the WLAN cable to the computer.
  7. Install:
    1. palmrest
    2. keyboard
    3. base cover
    4. SD card
    5. battery
  8. Follow the procedures in After Working Inside Your Computer.


0/3000 characters