- Notes, cautions, and warnings
- Working on Your Computer
- Docking Your Computer
- Removing and
Installing Components
- Recommended Tools
- System Overview
- Removing the SD Card
- Installing the SD Card
- Removing the Battery
- Installing the Battery
- Removing the Base Cover
- Installing the Base Cover
- Removing the mSATA SSD card
- Installing the mSATA SSD card
- Removing the Keyboard Trim
- Installing the Keyboard Trim
- Removing the Keyboard
- Installing the Keyboard
- Removing the Palmrest
- Installing the Palmrest
- Removing the Wi‐Fi Switch Board
- Installing the Wi‐Fi Switch Board
- Removing the Memory Module
- Installing the Memory Module
- Removing the WLAN Card
- Installing the WLAN Card
- Removing the WWAN Card
- Installing the WWAN Card
- Removing the Display Bezel
- Installing the Display Bezel
- Removing the Display Panel
- Installing the Display Panel
- Removing the Coin-Cell Battery
- Removing the Speakers
- Installing the Speakers
- Removing the Display-Hinge Cover
- Installing the Display-Hinge Cover
- Removing the Heatsink
- Installing the Heatsink
- Removing the Display Assembly
- Installing the Display Assembly
- Removing the System Fan
- Installing the System Fan
- Removing the System Board
- Installing the System Board
- Removing the Power Connector
- Installing the Power Connector
- Docking Port Information
- System Setup
- Diagnostics
- Specifications
- Contacting Dell
Dell Latitude E7240 Owner's Manual
Removing the Palmrest
- Perform the following steps as shown in the illustration:
- Disconnect the cable from the computer.
- Lift the latch that secures the keyboard cable to the computer [1].
- Disconnect the keyboard cable [2].
- Disconnect the touch cable from the computer [3].
- Unroute the cables from the slot [4].
- Remove the screws that secure the palmrest assembly to
the front of the computer. Pry the edges and lift the palmrest assembly
from the computer.
请提供评级（1-5星）。
请提供评级（1-5星）。
请提供评级（1-5星）。
请选择这篇文章是否有帮助。
注释中不得包含以下特殊字符：<>()\