跳转至主要内容
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”(公司管理),管理Dell EMC站点、产品和产品级联系人。

Dell PowerEdge R730 Owner's Manual

Opening and closing the PCIe card holder latch

Prerequisites

  1. Follow the safety guidelines listed in Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. To open the PCIe card holder latch, press the release tab.
  2. To close the PCIe card holder latch, rotate the latch clockwise until it locks.
    NOTE: Before installing a full-length PCIe card, the PCIe card holder latch must be closed. When the full-length PCIe card is installed, open the PCIe card holder latch. Before removing the full-length PCIe card, you must close the PCIe card holder latch.
    Figure 1. Opening the PCIe card holder latch
    This figure shows opening the PCIe card holder latch
    1. PCIe card holder
    2. release tab
    3. PCIe card holder latch
    Figure 2. Closing the PCIe card holder latch
    This figure shows closing the PCIe card holder latch
    1. PCIe card holder
    2. release tab
    3. PCIe card holder latch

Next steps

Follow the procedure listed in the After working inside your system section.


对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗?
0/3000 characters
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符:<>()\