跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell PowerEdge R730 Owner's Manual

PDF

Removing the cooling fan assembly

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. Unlock the cooling fan assembly from the chassis by lifting the release levers.
  2. Lift the cooling fan assembly out of the chassis.
    Figure 1. Removing the cooling fan assembly
    This figure shows removing the cooling fan assembly.
    1. cooling fan assembly
    2. cooling fan (6)
    3. release lever (2)
    4. guide pin on the system board (2)
    5. cooling fan connector (6)
    6. guide pin on the chassis (6)

Next steps

  1. Install the cooling fan assembly.
  2. Follow the procedure listed in the After working inside your system section.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\