Dell PowerEdge R730 Owner's Manual

Troubleshooting an optical drive

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

Try using a different CD or DVD.
If the problem is not resolved, enter System Setup and ensure that the integrated SATA controller and the drive's SATA port are enabled.
Run the appropriate diagnostic test.
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
If installed, remove the bezel.
Remove the system cover.
Ensure that the interface cable is securely connected to the optical drive and to the controller.
Ensure that a power cable is properly connected to the drive.
Install the system cover.

Next steps

If the problem persists, see the Getting help section.

欢迎

欢迎访问戴尔

Dell PowerEdge R730 Owner's Manual

Troubleshooting an optical drive

Prerequisites

Steps

Next steps

对此内容评级