跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell PowerEdge R6525 Installation and Service Manual

PDF

Installing the air shroud

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.

Steps

  1. Align the slot on the air shroud with the standoff on the system.
  2. Lower the air shroud into the system until it is firmly seated.
    NOTE:The air shroud is required for the standard heat sink configuration. For the L-type heat sink configuration, air shroud is not supported.
    Figure 1. Installing the air shroud
    This shows how to install the air shroud.
  3. For the air shroud on the rear drive module, lower the air shroud into the rear drive module until it is firmly seated.
    Figure 2. Installing the air shroud on the rear drive module

    Installing the air shroud on the rear drive module

Next steps

  1. Follow the procedure listed in After working inside your system.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\