PowerEdge R240

BIOS downgrading is blocked for certain memory configurations to prevent a system stop caused by a microcode issue in older versions.

Learn how to create and export a SupportAssist Collection using iDRAC9 and iDRAC10 on Dell devices. Resolve technical issues with this step-by-step guide.

iDRAC update available to resolve this fan problem seen on some PowerEdge servers.

Dell OS and Applications Solutions on Dell TechCenter - Project Sputnik, Microsoft Windows, Red Hat Linux, SUSE, Ubuntu, and more

The article describes how to install Red Hat Enterprise Linux manually on a PowerEdge server. This guide covers installation steps, environment setup, precautions, and necessary driver configurations.

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This article explains how to export the Windows Server logs in Windows Server. These logs can help to identify and resolve windows issues.

This article explains how to import and export the integrated Dell Remote Access Controller iDRAC7, iDRAC8, and iDRAC9 License.

Firmware updates using the iDRAC or LifeCycle Controller does not work on any Emulex 8 Gb fiber channel adapter.

This article describes how to reenable the Lifecycle Controller (LCC) when it goes into recovery mode.

Micron 5x00 Series SSDs may experience read/write performance degradation after reaching approximately 65,535 power-on hours (POH), which equates to roughly 7.5 years of operation. This issue affects performance only and does not result in data loss or drive failure.

This article provides information about how to update your system's firmware from the Lifecycle Controller on Dell servers.

This article explains how to check the iDRAC IP address on your Dell PowerEdge server using the LCD panel.

14G Intel platform servers may report firmware error messages after installed Red Hat Enterprise Linux 8.3.

This article takes about the different error messages on NVDIMM-N and self healing and does it differ from RDIMMs and LRDIMMs.

This article shows How To determine why a virtual machine powered off or rebooted by reviewing log files and host details to identify guest shutdowns, user or API requests, HA resets or system faults.

This article explains how to perform a driver or firmware update directly from the operating system (OS) using a Dell Update Packages (DUP).

Dell iDRAC9 and iDRAC10 remediations for a Command Injection security vulnerability that could be exploited by malicious users to compromise the affected system.

If the LifeCycle Controller (LCC) is enabled but it is missing in the menu during the POST, it is possible that you must import the iDRAC license to enable it again.

This article explains how to find supported memory configuration for your PowerEdge server.

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

This article describes the different type of controllers and the ways in which they should be reseated.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

This article describes how to find the iDRAC's current MAC address.

Most PowerEdge servers and other products that leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller. This article helps to quickly identify the iDRAC version.

This article describes the "Easy Restore", which is a built-in storage component that maintains critical configuration information.

This article explains how to use the Import Server License feature to import an iDRAC license from the Lifecycle Controller UI.

Frequently Asked Questions (FAQ) about Physical Drives replacement in RAID Server and MD Arrays

This article provides steps to troubleshoot a chassis intrusion, chassis open message for PowerEdge servers.

This article provides information about how to delete a virtual disk using the Device Settings menu on a PowerEdge server. If your PowerEdge server is running the UEFI mode as a boot mode, the RAID BIOS is not displayed.