Removal
Left side cover
Identify the left side cover highlighted in blue.
Loosen the captive screw that secures the left side cover latch to the chassis.
Pull on the left side cover latch to release the left side cover from the chassis.
Remove and lift the left side cover from the chassis.
Graphics card end holder
Identify the graphics card end holder highlighted in blue.
Slide the release latch to its unlock position and lift the graphics card end holder away from the front chassis fan.
Graphics card
Identify the graphics card highlighted in blue.
Press and hold the securing clip on the graphics card power cable, then pull the connector off the graphics card.
Lift the pull tab and open the expansion card door.
Push the securing tab on the PCIe slot on the system board away from the graphics card.
Grasp the card by its top corner and ease it out of the slot.
Install
Graphics card
Identify the graphics card location highlighted in blue.
Place the card into the PCIe slot and press down firmly until the single graphics card snaps into place.
Close the expansion door and snap the latch back into position.
Connect the graphics card power cable to the graphics card.
Graphics card end holder
Identify the graphics card end holder location highlighted in blue.
Install the graphics card end holder over the front chassis fan and slide the latch into its lock position.
Left side cover
Identify the side cover location highlighted in blue.
Slide the bottom edge of the left side cover into the chassis.
Push the left side cover into place.
Tighten the captive screw that secures the left side cover latch to the chassis.