Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Slide and lift the cable cover from the back of the computer.
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Solid State Drive Expansion Card
Identify the solid state drive expansion card highlighted in blue.
Lift the tab to open the card retention bracket.
Lift and disconnect the solid state drive expansion card from the system board.
Place the solid state drive expansion card on a flat and clean surface.
Remove the screw that secures the SSD to the solid state drive expansion card.
Slide and remove the solid state drive from the connector on the exapnsion card.
Install
Solid State Drive Expansion Card
Identify the solid state drive expansion card location highlighted in blue.
Slide and install the SSD into the slot on the solid state drive expansion card.
Install the screw that secures the SSD to the solid state drive expansion card.
Align the solid state drive expansion card with the slot on the system board.
Place the solid state drive expansion card into the slot and press down on it.
Rotate the card retention bracket toward the chassis until it snaps into place.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover to the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis then slide left.
Slide the cable cover lock to secure the cable cover to the chassis.