Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Slide and lift the cable cover from the back of the computer.
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Puck Antenna Expansion Card
Identify the puck antenna expansion card highlighted in blue.
Disconnect the puck antenna module cables from the puck antenna expansion card on the back of the chassis.
Lift the tab to open the card retention bracket.
Remove the puck antenna expansion card from the system board.
Install
Puck Antenna Expansion Card
Identify the puck antenna expansion card location highlighted in blue.
Align the puck antenna expansion card on the system board.
Align and place the puck antenna expansion card into the slot on the system board, then press down on it.
Rotate the card retention bracket towards the chassis until it snaps into place.
Connect the puck antenna module cables to the puck antenna expansion card on the back of the chassis.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover to the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis then slide left.
Slide the cable cover lock to secure the cable cover to the chassis.