Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Slide and lift the cable cover from the back of the computer.
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Graphics Card
Identify the graphics card highlighted in blue.
Lift the tab to open the PCIe latch.
Push and hold the securing tab on the graphics card slot, then lift the graphics card out of the slot.
Install
Graphics Card
Identify the graphics card location highlighted in blue.
Align the graphics card with the slot on the system board.
Using the alignment post, insert the graphics card into the connector and press it down firmly.
Rotate the PCIe latch towards the chassis until it snaps into place.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover to the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis then slide left.
Slide the cable cover lock to secure the cable cover to the chassis.