Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Using a plastic scribe, gently pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it away from the chassis.
Drive Bay
After all the parts are removed, the drive bay remains.
Graphics Card
Identify the graphics card highlighted in blue.
Open the PCIe latch that secures the graphics card.
Push the tab that secures the graphics card to the system board.
Lift the graphics card from the system board.
Coin Cell Battery
Identify the coin cell battery highlighted in blue.
Pinch the securing tabs on the coin cell cover to release it from the coin cell battery socket.
Lift the coin cell cover off the battery socket.
Using a plastic scribe, gently pry the coin cell battery out of the slot on the system board.
Remove the coin cell battery from the coin cell battery socket.
Install
Coin Cell Battery
Identify the coin cell battery location highlighted in blue.
Insert the coin cell battery into the socket with the positive side (+) label facing up.
Snap the coin cell battery into the socket.
Align the coin cell battery cover with the battery socket and press it into place.
Graphics Card
Identify the graphics card location highlighted in blue.
Using the alignment post, insert the graphics card into the connector and press it down firmly.
Close the PCIe latch to secure the graphics card.
Drive Bay
Identify the drive bay highlighted in blue.
Front Cover
Identify the front cover location highlighted in blue.
Align and insert the front cover tabs into the slots on the right side of the chassis.
Rotate the front cover toward the chassis and press it into place.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.