Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Using a plastic scribe, gently pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it away from the chassis.
Drive Bay Assembly
Identify the drive bay highlighted in blue.
Lift the drive bay assembly at an angle to release the tabs from the chassis.
Slide and remove the drive bay assembly from the chassis.
Internal Speaker
Identify the internal speaker highlighted in blue.
Disconnect the internal speaker cable from the system board.
Unroute the internal speaker cable from the routing guides on the chassis.
Press the tab, then slide and remove the internal speaker from the chassis.
Install
Internal Speaker
Identify the internal speaker location highlighted in blue.
Place and slide the internal speaker into the bracket on the chassis.
Route the internal speaker cable through the routing guides on the chassis.
Connect the internal speaker cable to the system board.
Drive Bay Assembly
Identify the drive bay assembly location highlighted in blue.
Slide and secure one side of the drive bay assembly to the chassis.
Press down the other end of the drive bay assembly, securing the tabs on the drive bay with the slots on the chassis.
Front Cover
Identify the front cover location highlighted in blue.
Align and insert the front cover tabs into the slots on the right side of the chassis.
Rotate the front cover toward the chassis and press it into place.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.