Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch to release the side cover from the computer.
Slide the side cover back and lift it off the chassis.
PS2 and Serial Module
Identify the PS2 and serial module highlighted in blue.
Lift the pull tab to open the PCIe door.
Disconnect the PS2 and serial module cable from the system board.
Unroute the PS2 and serial module cable from the routing guides on the chassis.
Remove the PS2 and serial module from the chassis.
Install
PS2 and Serial Module
Identify the PS2 and serial module location highlighted in blue.
Align and place the PS2 and serial module in the PCIe slot on the chassis.
Route the PS2 and serial module cable through the routing guides on the chassis.
Connect the PS2 and serial module cable on the system board.
Close the PCIe door and press it gently until it clicks in place on the chassis, to secure the PS2 and serial module.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots on the chassis.
Slide the side cover forward until you hear the latch click.