Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch to release the side cover from the computer.
Slide the side cover back and lift it off the chassis.
Front bezel
Identify the front bezel highlighted in blue.
Gently pry and release the front bezel tabs sequentially from the top.
Rotate the front bezel outward from the chassis and remove the front bezel.
Power supply unit
Identify the power supply unit highlighted in blue.
Disconnect the power supply cables from their connectors on the system board.
Unroute the power supply cables from the routing guides on the chassis.
Remove the screws that secure the power supply unit to the chassis.
Slide and lift the power supply unit off the chassis.
Install
Power supply unit
Identify the power supply unit location highlighted in blue.
Place the power supply unit on the chassis and slide it towards the back of the chassis.
Install the screws to secure the power supply unit to the chassis.
Route the power supply cables through their routing guides on the chassis.
Connect the power supply cables to their connectors on the system board.
Front bezel
Identify the front bezel location highlighted in blue.
Align the front cover tabs with the slots on the chassis.
Rotate the front cover towards the chassis and snap it into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots on the chassis.
Slide the side cover forward until you hear the latch click.