Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Air shroud
Identify the air shroud highlighted in blue
Holding the touch points, lift the cooling shroud away from the system.
Low profile right riser
Identify the low profile right riser highlighted in blue
Loosen the captive screw that securing the riser to the system board.
Hold the touch points and lift the low profile right riser assembly from the system board.
Install
Low profile right riser
Identify the low profile right riser location highlighted in blue
Lower the low profile right riser assembly into place until it is fully seated in the connector on the system board.
Tighten the captive screw to secure the riser to the system board.
Air shroud
Identify the cooling shroud location highlighted in blue
Align the slot on the air shroud with the standoff on the chassis.
Lower the air shroud into the system until it is firmly seated.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.