Removal
Front Bezel
Identify the front bezel highlighted in blue
Unlock the front bezel by using the key.
Press the release button, and pull the left end of the front bezel.
Unhook the right end, and remove the front bezel.
Drive carrier
Select the drive carrier you want to replace
Press the release button to open the release handle.
Holding the handle, slide the drive carrier out of the drive slot.
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counterclockwise to the unlock position.
Lift the release latch until the system cover slides back.
Lift the cover from the system.
Backplane cover
Identify the drive backplane cover highlighted in blue
Slide and lift the drive backplane cover in the direction of the arrows marked on the drive backplane cover.
Airshroud
Cooling Fan Cage Assembly
Identify the cooling fan cage assembly highlighted in blue.
Lift the blue release levers to unlock the cooling fan cage assembly from the system.
Hold the release levers, and lift the cooling fan cage assembly away from the system.
Front Mounting Front PERC Module
Identify the Front PERC module highlighted in blue.
Disconnect the cables from the PERC module.
Loosen the captive screws on the front PERC module.
Slide and pull the front PERC module to disengage from the connector on the drive backplane.
Drive backplane
Identify the drive backplane highlighted in blue
Disconnect the cables from the backplane.
Press the blue release tabs and lift the backplane to disengage the backplane from the hooks on the system.
Lift and pull the drive backplane out of the system.
Install
Drive backplane
Identify the drive backplane location highlighted in blue
Use the guides on the system as guides to align the slots on the backplane.
Insert the backplane into the guides and lower the backplane until the blue release tabs clicks into place.
Connect the cables to the backplane.
Front Mounting Front PERC Module
Identify the internal PERC riser location highlighted in blue.
Align the front PERC module at an angle until the tray touches the slot in the system.
Slide and press the front PERC module connector with the connector on the drive backplane until firmly seated.
Tighten the captive screws on the front PERC module.
Connect the cables to the PERC module.
Cooling Fan Cage Assembly
Identify the cooling fan cage assembly location highlighted in blue.
Align the guide rails on the cooling fan cage assembly with the standoffs on the system.
Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on the system board.
Press the release levers to lock the cooling fan cage assembly into the system.
Airshroud
Backplane cover
Identify the drive backplane cover location highlighted in blue
Align the drive backplane cover with the guide slots on the system.
Slide the drive backplane cover to the front of the system until the drive backplane cover fits into place.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system and slide the system cover.
Close the system cover release latch.
Using a flat head or Phillips screwdriver, rotate the lock clockwise to the lock position.
Drive carrier
Confirm the drive carrier you want to replace
Press the release button on the front of the drive carrier to open the release handle.
Insert the drive carrier into the slot and slide until it connects with the backplane.
Close the drive carrier release handle to lock the drive in place.
Front Bezel
Identify the front bezel location highlighted in blue
Align and insert the tabs on the bezel into the slots on the system.
Press the bezel until the release button clicks in place.
Lock the front bezel by using the key.