Removal
System Cover
Identify the system cover highlighted in blue.
Rotate the latch release lock counter clockwise to the unlocked position.
Open the latch on the system cover
Slide system cover toward the back and using the latch lift system cover up from system.
Cooling Shroud
Identify the cooling shroud highlighted in blue
Holding the touch points, lift the cooling shroud away from the system.
Riser 2
Identify the expansion card riser 2 highlighted in blue
Grip the release tab and lift the riser from the riser connector on the system board
Riser 3
Identify the expansion card riser 2 highlighted in blue
Grip the release tab and lift the riser from the riser connector on the system board
Internal Dual SD Module (IDSDM)
Identify the internal dual SD module (IDSDM) highlighted in blue
Locate the blue pull tab on the internal dual SD module
Pull up on the blue pull tab and lift the IDSDM out of the system
Install
Internal Dual SD Module (IDSDM)
Identify the internal dual SD module (IDSDM) location highlighted in blue
Align the IDSDM connector with the connector on the system board
Press the IDSDM into the connector
Riser 3
Identify the expansion card riser 2 location highlighted in blue
Lower the riser into the system until the riser connector engages with the connector on the system board
Riser 2
Identify the expansion card riser 2 location highlighted in blue
Lower the riser into the system until the riser connector engages with the connector on the system board
Cooling Shroud
Identify the cooling shroud location highlighted in blue
Align the tabs on the cooling shroud with securing slots on the system, then lower the cooling shroud into the system until firmly seated.
System Cover
Identify the system cover location highlighted in blue
Align the slots on the system cover with the tabs on the system.
Push the system cover latch down. The system cover slides forward and the slots on the system cover engage with the tabs on the system.
Rotate the latch release lock clockwise to the locked position.