Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Lift and slide the cable cover off the back of the chassis.
Left Side Cover
Identify the left side cover highlighted in blue.
Loosen the captive screws that secure the left side cover to the chassis.
Slide and lift the left side cover from the chassis.
Puck Antenna Expansion Card
Identify the puck antenna expansion card highlighted in blue.
Disconnect the puck antenna module cables from the puck antenna expansion card on the back of the chassis.
Lift the tab to open the card retention bracket.
Remove the puck antenna expansion card from the system board.
Install
Puck Antenna Expansion Card
Identify the puck antenna expansion card location highlighted in blue.
Place the puck antenna expansion card into the slot, then press down on it.
Rotate the card retention bracket towards the chassis until it snaps into place.
Connect the puck antenna module cables to the puck antenna expansion card on the back of the chassis.
Left Side Cover
Identify the left side cover location highlighted in blue.
Slide and install the left side cover into the chassis.
Tighten the captive screws that secure the left side cover to the chassis.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover with the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis and slide downwards.
Slide the cable cover lock to secure the cable cover to the chassis.