Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Lift and slide the cable cover off the back of the chassis.
Left Side Cover
Identify the left side cover highlighted in blue.
Loosen the captive screws that secure the left side cover to the chassis.
Slide and lift the left side cover from the chassis.
Graphics card
Identify the graphics card highlighted in blue.
Lift the tab to open the card retention bracket.
Push and hold the securing tab on the graphics card slot and lift the graphics card out of the slot.
Install
Graphics card
Identify the graphics card location highlighted in blue.
Align the graphics card with the slot on the system board.
Using the alignment post, connect the graphics card in the connector and press down firmly.
Rotate the card retention bracket towards the chassis until it snaps into place.
Left Side Cover
Identify the left side cover location highlighted in blue.
Slide and install the left side cover into the chassis.
Tighten the captive screws that secure the left side cover to the chassis.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover with the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis and slide downwards.
Slide the cable cover lock to secure the cable cover to the chassis.