Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Lift and slide the cable cover off the back of the chassis.
Dust Filter
Identify the dust filter highlighted in blue.
Pry and remove the dust filter from the chassis.
Left Side Cover
Identify the left side cover highlighted in blue.
Loosen the captive screws that secure the left side cover to the chassis.
Slide and lift the left side cover from the chassis.
Wireless Card (WLAN)
Identify the wireless card (WLAN) highlighted in blue.
Remove the screw that secures the wireless card to the system board.
Remove the wireless card bracket off the wireless card.
Disconnect the antenna cables from the wireless card.
Slide and remove the wireless card from the system board.
Front Cover
Identify the front cover highlighted in blue.
Gently pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it away from the chassis.
Drive Bay
Identify the drive bay highlighted in blue.
Disconnect the optical drive data and power cables from the optical drive.
Unroute the optical drive data and power cables from the routing guide on the drive bay.
Disconnect the hard drive data and power cables from the hard drive.
Lift the drive bay at an angle to release the tabs from the chassis.
Slide and remove the drive bay from the chassis.
Power Supply Unit
Identify the power supply unit highlighted in blue.
Press the securing clip and disconnect the processor and system board power cables from the system board.
Unroute the processor and system board power cables from the routing guide on the chassis.
Remove the screws that secure the power supply unit to the chassis.
Slide and lift the power upply unit off the chassis.
Install
Power Supply Unit
Identify the power supply unit location highlighted in blue.
Place the power supply unit on the chassis and slide it towards the back of the chassis.
Install the screws to secure the power supply unit on the chassis.
Route the processor and system board power cables through their routing guides on the chassis.
Connect the processor and system board power cables to the system board.
Drive Bay
Identify the drive bay location highlighted in blue.
Align and secure one side of the drive bay to the chassis.
Press down the other end of the drive bay securing the tabs on the drive bay with the slots on the chassis.
Connect the hard drive data and power cables to the hard drive.
Connect the optical drive data and power cables to the optical drive.
Route the optical drive data and power cables through the guide on the drive bay.
Front Cover
Identify the front cover location highlighted in blue.
Align the front cover tabs into the slots on the chassis.
Install and rotate the front cover towards the chassis and press it into place.
Wireless Card (WLAN)
Identify the wireless card (WLAN) location highlighted in blue.
Slide the wireless card at an angle into the slot on the system board.
Connect the white cable to the main (white triangle).
Connect the black cable to the auxiliary (black triangle).
Place the wireless card bracket on the wireless card.
Install the screw that secures the wireless card to the system board.
Left Side Cover
Identify the left side cover location highlighted in blue.
Slide and install the left side cover into the chassis.
Tighten the captive screws that secure the left side cover to the chassis.
Dust Filter
Identify the dust filter location highlighted in blue.
Align the tabs on the dust filter to the grooves on the front cover.
Press the dust filter into place on the front cover.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover with the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis and slide downwards.
Slide the cable cover lock to secure the cable cover to the chassis.