Removal
Cable Cover
Identify the cable cover highlighted in blue.
Slide the cable cover lock to release the cable cover from the chassis.
Lift and slide the cable cover from the back of the computer.
Dust Filter
Identify the dust filter highlighted in blue.
Pry and remove the dust filter from the front cover.
Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Gently pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and slide it away from the chassis.
Drive Bay
Identify the drive bay highlighted in blue.
Disconnect the optical drive data and power cables from the optical drive.
Unroute the optical drive data and power cables from the routing guide on the drive bay.
Disconnect the hard drive data and power cables from the hard drive.
Lift the drive bay at an angle to release the tabs from the chassis.
Slide and remove the drive bay from the chassis.
Coin Cell Battery Cover
Identify the coin cell battery cover highlighted in blue.
Pinch the securing tabs on the coin cell cover to release it from the coin cell battery socket.
Lift the coin cell cover off the battery socket.
Coin Cell Battery
Identify the coin cell battery highlighted in blue.
Push the release lever on the coin cell battery socket to release the coin cell battery from the socket.
Remove the coin cell battery from the coin cell battery socket.
Install
Coin Cell Battery
Identify the coin cell battery location highlighted in blue.
Insert the coin cell battery into the socket with the positive side (+) label facing up.
Snap the coin cell battery into the socket.
Coin Cell Battery Cover
Identify the coin cell battery cover location highlighted in blue.
Align the coin cell battery cover with the battery socket and press it into place.
Drive Bay
Identify the drive bay location highlighted in blue.
Slide and secure one side of the drive bay to the chassis.
Press down the other end of the drive bay securing the tabs on the drive bay with the slots on the chassis.
Connect the hard drive data and power cables to the hard drive.
Connect the optical drive data and power cables to the optical drive.
Route the optical drive data and power cables through the routing guide on the drive bay.
Front Cover
Identify the front cover location highlighted in blue.
Align the front cover tabs into the slots on the chassis.
Rotate the front cover toward the chassis and press it into place.
Side Cover
Identify the side cover location highlighted in blue.
Slide and install the side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.
Dust Filter
Identify the dust filter location highlighted in blue.
Align the tabs on the dust filter with the grooves on the front cover.
Press the dust filter into place on the front cover.
Cable Cover
Identify the cable cover location highlighted in blue.
Align the tabs on the cable cover to the slots on the back of the chassis.
Insert the tabs on the cable cover into the slots on the back of the chassis and slide downwards.
Slide the cable cover lock to secure the cable cover to the chassis.