Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Slide and lift the side cover off the chassis.
Fan
Identify the fan highlighted in blue.
Disconnect the fan cable from the system board.
Grip the tabs on the fan, lift the fan upward and slide it out of the chassis.
Memory Module
Identify the memory module highlighted in blue.
Using your fingertips, carefully spread apart the securing clips on each end until the memory module pops up.
Slide and remove the memory module from the memory module slot.
Install
Memory Module
Identify the memory module location highlighted in blue.
Align the notch on the memory module with the tab on the memory module slot.
Insert the memory module into the slot and press it down until it clicks into place.
Fan
Identify the fan location highlighted in blue.
Slide the fan into its slot on the chassis, then press it downward until it snaps into place.
Connect the fan cable to the system board.
Side Cover
Identify the side cover location highlighted in blue.
Place the side cover on the chassis by aligning its tabs with the slots on the system.
Slide the side cover towards the front of the computer.
Tighten the captive screws that secure the side cover to the chassis.