Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the screws on the base cover.
Remove the screws that secure the base cover to the system.
Using a plastic scribe, pry the base cover from the hinges around the outside to loosen.
Lift the base cover off the palm rest and keyboard assembly.
Battery Cable
Identify the battery cable highlighted in blue.
Peel the tape that secures the battery cable.
Disconnect the battery cable from the system board.
Press and hold the power button for 10 seconds to ground the system and remove residual static electricity.
Coin Cell Battery
Identify the coin cell battery highlighted in blue.
Disconnect the coin cell battery cable from the I/O board.
Peel the coin cell battery from the system.
Install
Coin Cell Battery
Identify the coin cell battery location highlighted in blue.
Adhere the coin cell battery to the coin cell battery slot on the system.
Route the coin cell battery cable and connect it to the I/O board.
Battery Cable
Identify the battery cable location highlighted in blue.
Connect the battery cable to the connector on the system board.
Adhere the tape that secures the battery cable.
Base Cover
Identify the base cover location highlighted in blue.
Place the base cover on the system and snap into place.
Tighten the screws that secure the base cover.
Install the screws that secure the base cover to the system.