Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the screws on the base cover.
Remove the screws that secure the base cover to the system.
Using a plastic scribe, pry the base cover from the hinges around the outside to loosen.
Lift the base cover off the palm rest and keyboard assembly.
Fan
Identify the fan highlighted in blue.
Disconnect the fan cable from the system board.
Remove the screws that secure the fan to the system.
Lift to remove the fan from the system.
Install
Fan
Identify the fan location highlighted in blue.
Install the fan in the slot on the system and align the screw holes.
Install the screws that secure the fan to the palm rest and keyboard assembly.
Connect the fan cable to the system board.
Base Cover
Identify the base cover location highlighted in blue.
Place the base cover on the system and snap into place.
Tighten the screws that secure the base cover.
Install the screws that secure the base cover to the system.