This 3D experience gives you the step by step process of replacing the Solid State Drive (SSD) 2230 and a OptiPlex Micro 7020. The procedure will also include removing the Side Cover, Speaker and reinstalling them.
Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumb screw that secures the side cover to the chassis.
Slide and lift the side cover off the chassis.
Speaker
Identify the speaker highlighted in blue.
Disconnect the speaker cable from the system board.
Remove the speaker cable from the routing guides on the chassis.
Press on the tab that secures the speaker and lift the speaker off the system board.
Solid State Drive (SSD) 2230
Install
Solid State Drive (SSD) 2230
Speaker
Identify the speaker location highlighted in blue.
Press and hold on the tab on the speaker and place the speaker on the system board.
Route the speaker cable through the routing guides on the chassis.
Connect the speaker cable to the system board.
Side Cover
Identify the side cover location highlighted in blue.
Slide the side cover into place towards the front of the computer.
Tighten the thumb screw that secure the side cover to the chassis.