Removal
Left side cover
Place the computer in an upright position as shown in the AR.
Identify the left side cover highlighted in blue.
Loosen the captive screw that secures the left side cover release latch to the chassis.
Pull the left side cover release latch to release the left side cover away from the chassis.
Lift the left side panel from the chassis.
Right side cover
Identify the right side cover highlighted in blue.
Pull and lift the right side cover away from the chassis.
Front bezel
Position the system as shown in the AR.
Identify the front bezel highlighted in blue.
Disconnect the front I/O panel cable from the system board.
Release the latch to unroute the cable.
Remove the screws that secures the front bezel to the front panel.
Pull the tabs of the front bezel from the slots on the front panel.
Unroute the front I/O-panel cable through the slot on the front panel.
Pull the front bezel, together with the front I/O-panel cable, away from the chassis slowly.
Top cover
Identify the top cover highlighted in blue.
Press down the latch from front side, and push/slide the cover toward to rear side, then lift the cover up.
Install
Top cover
Identify the top cover location highlighted in blue.
Align the tabs on the top cover with the slots on the chassis and snap the top cover into place.
Front bezel
Identify the front bezel location highlighted in blue.
Align the front bezel with the front panel.
Route the front I/O panel cable through the slot on the front panel.
Push the front bezel towards the front panel and ensure the tabs clip on to the slots of the front panel.
Install the screws that secures the front bezel to the front panel.
Route the front I/O panel cable through the latch and close the latch.
Connect the front I/O panel cable to the system board.
Position the system as shown in the AR.
Right side cover
Identify the right side cover location highlighted in blue.
Align the tabs on the right side cover with the slots on the chassis.
Push the right side cover towards the chassis until it snaps into place.
Left side cover
Identify the left side cover location highlighted in blue.
Locate the tabs on the left side cover and slots on the chassis.
Rotate the left side cover towards the chassis until it snaps into place.
Install the release latch to secure the left side cover to the system.
Tighten the captive screw that secures the left side cover release latch to the chassis.