Removal
Left side cover
Place the computer in an upright position as shown in the AR.
Identify the left side cover highlighted in blue.
Loosen the captive screw that secures the left side cover release latch to the chassis.
Pull the left side cover release latch to release the left side cover away from the chassis.
Lift the left side panel from the chassis.
Wireless module (WLAN)
Identify the wireless module (WLAN) highlighted in blue.
Remove the screw that secures the bracket to the system.
Side and lift the bracket off the wireless module.
Disconnect the WLAN cables (black and white cables) from the wireless module.
Slide and remove the wireless module out of the slot.
Install
Wireless module (WLAN)
Identify the wireless module (WLAN) location highlighted in blue.
Insert the WLAN into the connector on the system board.
Connect the WLAN cables (black and white cables) from the wireless module.
Align the screw hole on the bracket with the screw hole on the system.
Install the screw that secures the bracket on the system.
Left side cover
Identify the left side cover location highlighted in blue.
Locate the tabs on the left side cover and slots on the chassis.
Rotate the left side cover towards the chassis until it snaps into place.
Install the release latch to secure the left side cover to the system.
Tighten the captive screw that secures the left side cover release latch to the chassis.