Removal
Left side cover
Place the computer in an upright position as shown in the AR.
Identify the left side cover highlighted in blue.
Loosen the captive screw that secures the left side cover release latch to the chassis.
Pull the left side cover release latch to release the left side cover away from the chassis.
Lift the left side panel from the chassis.
VR heat sink
Identify the VR heat sink highlighted in blue.
Loosen the captive screws that secure the VR heat sink to the system board.
Lift the VR heat sink (2) off the system board.
Install
VR heat sink
Identify the VR heat sink location highlighted in blue.
Align the captive screws of the VR heat sink (2) with the screw holes on the system board.
Tighten the captive screws that secure the VR heat sink to the system board.
Left side cover
Identify the left side cover location highlighted in blue.
Locate the tabs on the left side cover and slots on the chassis.
Rotate the left side cover towards the chassis until it snaps into place.
Install the release latch to secure the left side cover to the system.
Tighten the captive screw that secures the left side cover release latch to the chassis.