Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch until your hear a click.
Slide the side cover towards the back of the computer and lift it from the system.
Dell Ultra Speed Drive Gen3 Card (2280)
Identify the dell ultra speed drive gen3 card highlighted in blue.
Pull the tab to open the PCIe door.
Lift the dell ultra speed drive gen3 card off the system board.
Turn the dell ultra speed drive gen3 card over.
Remove the screw that secures the SSD to the dell ultra speed drive gen3 card.
Turn the dell ultra speed drive gen3 card over.
Lift the SSD and remove the standoff nut from the SSD.
Remove the SSD from the slot on the ultra speed drive gen3 card.
Install
Dell Ultra Speed Drive Gen3 Card (2280)
Identify the dell ultra speed drive gen3 card location highlighted in blue.
Align the notch with the tab and slide the SSD into the connector.
Install the standoff nut on the SSD.
Turn the dell ultra speed drive gen3 card over.
Install the screw that secures the SSD to the dell ultra speed drive gen3 card.
Turn the dell ultra speed drive gen3 card over.
Using the alignment post on the PCIe slot, insert the card into its connector and press down firmly.
Close the PCIe door.
Side Cover
Identify the side cover location highlighted in blue.
Slide the side cover towards the front of the computer until you hear the release latch click.