How to replace the Battery on a Dell Pro 14 Plus PB14250 V Series

This 3D experience gives you the step by step process of replacing the Battery and a Dell Pro 14 Plus PB14250 V Series. The procedure will also include removing the Base Cover, Battery Cable and reinstalling them.

Removal

Base Cover

Identify the base cover highlighted in blue.

Loosen the captive screws that secure the base cover to the palm rest assembly.

Pry open the base cover from the recesses that are located in the U shaped indents at the top edge of the base cover near the hinges.

Lift the base cover off the palm rest assembly.

Identify the base cover location highlighted in blue.

Align and place the base cover on the palm rest assembly and snap it into place.

Tighten the captive screws that secure the base cover to the palm rest assembly.

Battery Cable

Identify the battery cable highlighted in blue.

Disconnect the battery cable from the system board.

Press and hold the power button for 10 seconds to ground the system and remove residual static electricity.

Battery

Identify the battery highlighted in blue.

Loosen the captive screws that secure the battery to the palm rest assembly.

Lift the battery off the palm rest assembly.

Flip the battery.

Unroute the battery cable from the routing guides on the battery.

Disconnect and remove the battery cable from the battery.

Identify the battery location highlighted in blue.

Place and connect the battery cable to its connector on the battery.

Route the battery cable through the routing guides on the battery.

Flip the battery.

Align and place the battery into the slot on the palm rest assembly.

Tighten the captive screws that secure the battery to the palm rest assembly.

Install

Battery

Identify the solid state drive (SSD) location highlighted in blue.

Align and slide the SSD into the slot on the system board. Install the blue holder if needed.

Install the screw that secures the SSD to the system board.

Install the SSD shielding cover on the system board.

Install the screws that secures the SSD shielding cover to the system board.

Battery Cable

Identify the battery cable location highlighted in blue.

Connect the battery cable to its connector on the system board.

Base Cover

Identify the battery cable location highlighted in blue.

Connect the battery cable to its connector on the system board.