Removal
Stand
Place the system on the flat and clean surface as shown.
Identify the stand highlighted in blue.
Press and hold down on the tab that secures the stand to the display assembly base.
Lift the stand off the display assembly base.
Back Cover
Identify the back cover highlighted in blue.
Place your palm in the middle of the back cover, and then pry the back cover from the display assembly base starting from the top corners.
Slide and lift the back cover off the display assembly base.
2.5 Hard Drive
Identify the hard drive highlighted in blue.
Remove the screw that secures the hard drive assembly to the display assembly base.
Slide and lift the hard drive assembly from the slot on the display assembly base.
Remove the screws that secure the hard drive bracket to the hard drive.
Remove the hard drive bracket off the hard drive.
Install
2.5 Hard Drive
Identify the hard drive location highlighted in blue.
Place the hard drive bracket on the hard drive and align with screw holes.
Install the screws that secure the hard drive bracket to the hard drive.
Place the hard drive assembly into the slot on the display assembly base.
Install the screw that secures the hard drive assembly to the display assembly base.
Back Cover
Identify the back cover location highlighted in blue.
Align the back cover to the display assembly base.
Press along the sides to snap the back cover into place on the display assembly base.
Stand
Identify the stand location highlighted in blue.
Align the stand to the slot with the display assembly base.
Insert the stand into place into the slot on the display assembly base.