Removal
Stand
Identify the stand highlighted in blue.
Press and hold down on the tab that secures the stand to the display assembly base.
Slide and lift the stand off the display assembly base.
Back Cover
Identify the back cover highlighted in blue.
Press down on the tab and slide the back cover to release.
Lift the back cover off the display assembly base.
System Board Shield
Identify the system board shield highlighted in blue.
Remove the screws that secure the system board shield to the display assembly base.
Lift the system board shield off the display assembly base.
I/O Cover
Identify the I/O cover highlighted in blue.
Remove the screws that secure the I/O cover to the display assembly base.
Lift the I/O cover off the display assembly base.
Bottom Cover
Identify the bottom cover highlighted in blue.
Remove the screws that secure the bottom cover to the display assembly base.
Lift the bottom cover off the display assembly base.
I/O Bracket
Identify the I/O bracket highlighted in blue.
Remove the screws that secure the power supply cable connector bracket to the display assembly base.
Lift the power supply cable connector bracket off the display assembly base.
Remove the screws that secure the I/O bracket to the display assembly base.
Lift the I/O bracket off the display assembly base.
Power Button and I/O Board
Identify the power button and I/O board highlighted in blue.
Remove the screws that secure the power button and I/O board shield to the display assembly base.
Lift the power button and I/O board shield off the display assembly base.
Open the latch and disconnect the power cable from the power button and I/O board.
Open the latch and disconnect the high speed cable from the power button and I/O board.
Remove the screws that secure the power button and I/O board to the display assembly base.
Lift the power button and I/O board off the display assembly base.
Install
Power Button and I/O Board
Identify the power button and I/O board location highlighted in blue.
Place the power button and I/O board on the display assembly base.
Install the screws that secure the power button and I/O board to the display assembly base.
Connect the power cable to the power button and I/O board. Close the latch to secure.
Connect the high speed cable to the power button and I/O board. Close the latch to secure.
Place the power button and I/O board shield on the display assembly base.
Install the screws that secure the power button and I/O board shield to the display assembly base.
I/O Bracket
Identify the I/O bracket location highlighted in blue.
Align and place the I/O bracket with the display assembly base.
Install the screws that secure the I/O cover to the display assembly base.
Place the power supply connector cable bracket on the display assembly base.
Install the screws that secure the power supply cable connector bracket to the display assembly base.
Bottom Cover
Identify the bottom cover location highlighted in blue.
Place the bottom cover on the display assembly base and align with screw holes.
Install the screws that secure the bottom cover to the display assembly base.
I/O Cover
Identify the I/O cover location highlighted in blue.
Align the I/O slots with the I/O ports, then place the I/O cover on the display assembly base and align with screw holes.
Install the screws that secure the I/O cover to the display assembly base.
System Board Shield
Identify the system board shield location highlighted in blue.
Place the system board shield on the display assembly base and align with screw holes.
Install the screws that secure the system board shield to the display assembly base.
Back Cover
Identify the back cover location highlighted in blue.
Align the back cover to the display assembly base.
Place and slide the back cover into place on the display assembly base.
Stand
Identify the stand location highlighted in blue.
At an angle, align the tabs on the stand with the slots on the display assembly base.
Slide the stand into place into the slot on the display assembly base.