Removal
Base Cover
Identify the base cover highlighted in blue.
Remove the screws that secure the base cover to the system.
Loosen the captive screws on the base cover.
Using a plastic scribe, pry the base cover from the bottom left and continue to work on the sides
Lift the base cover off the system.
Wireless Module (WLAN)
Identify the wireless module (WLAN) highlighted in blue
Remove the screw that secures the bracket to the wireless module (WLAN).
Lift the bracket off the wireless module.
Disconnect the antenna cables from the wireless module (WLAN).
Slide and remove the wireless module out of the slot on the system board.
Install
Wireless Module (WLAN)
Identify the wireless module location (WLAN) highlighted in blue
Align the notch on the wireless module with the tab on the slot and insert into the slot.
Connect the black cable to the auxiliary (black triangle).
Connect the cable with white sticker to the main (white triangle).
Align the screw hole on the bracket with the screw hole on the wireless module
Install the screw that secures the bracket and wireless module to the system.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover and press the edges of the cover until it clicks into place.
Tighten the captive screws that secure the base cover.
Install the screws that secure the base cover.