Removal
Base Cover
Identify the base cover highlighted in blue.
Remove the screws that secure the base cover to the system.
Loosen the captive screws on the base cover.
Using a plastic scribe, pry the base cover from the bottom left and continue to work on the sides
Lift the base cover off the system.
SSD 2230
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw that secures the SSD bracket to the system.
Slide and lift the SSD bracket off the system
Turn and place the solid state drive assembly on a dry and flat surface
Remove the screw that secures the SSD to the SSD bracket
Remove the solid state drive (SSD) from the SSD bracket
Install
SSD 2230
Identify the solid state drive (SSD) location highlighted in blue.
Align the notch on the SSD with the screw on the SSD bracket
Install the screw that secures the SSD to the SSD bracket
Align the notches on the solid state drive (SSD) and slide into the slot on the system board.
Install the screw that secures the SSD bracket to the system.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover and press the edges of the cover until it clicks into place.
Tighten the captive screws that secure the base cover.
Install the screws that secure the base cover.