Removal
Front Bezel
Identify the front bezel highlighted in blue.
Unlock the bezel.
Press the release button, and pull the left end of the front bezel.
Unhook the right end, and remove the bezel.
Drive carrier - 2.5 inch
Select the drive carrier, you want to replace.
Press the release button to open the drive carrier release handle.
Holding the drive carrier release handle, slide the drive carrier out of the drive slot.
Drive - 2.5 inch
Identify the drive highlighted in blue.
Using a phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
Lift the drive out of the drive carrier.
Install
Drive - 2.5 inch
Identify the drive location highlighted in blue.
Insert the drive into the drive carrier with the drive connector facing towards the rear of the carrier.
Using a phillips #1 screwdriver, install the screws that secure the drive to the drive carrier.
Drive carrier - 2.5 inch
Confirm the drive carrier, you want to replace.
Press the release button on the front of the drive carrier to open the release handle.
Slide the drive carrier into the drive slot.
Close the drive carrier release handle to lock the drive in place.
Front Bezel
Identify the front bezel location highlighted in blue.
Align and insert the tabs on the bezel into the slots on the system.
Press the bezel until the release button clicks in place.
Lock the bezel.