Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumb screw that secures the side cover to the chassis.
Slide towards the front and lift the side cover off the chassis.
Riser card Module
Identify the riser card module highlighted in blue.
Remove the screws that secure the riser card module to the chassis.
Lift the riser card module off the chassis.
Graphics Card
Place the riser card module in a clean flat surface as shown.
Identify the graphics card highlighted in blue.
Press the retainer arm to release the hook and open the retainer.
Slide the air duct assembly upwards along the rail of the riser card module.
Slide the graphics card upwards along the edges of the riser card module to detach it from the riser card module.
Install
Graphics Card
Identify the graphics card location highlighted in blue.
Align the graphics card with the slot on the riser card module.
Slide the graphics card downwards into the slot on the riser card module until it clicks into place securely.
Position the air duct assembly, slide it into the rail on the riser card module and push it downwards to secure it.
Secure the retainer back into its place.
Riser card Module
Identify the riser card module location highlighted in blue.
Install the riser card module on the chassis and align with screw holes.
Install the screws that secure the riser card module to the chassis.
Side Cover
Identify the side cover location highlighted in blue.
Slide the side cover into place towards the front of the chassis.
Tighten the thumb screw that secure the side cover to the chassis.