Brocade switching technology integrated with Dell M1000e blade architecture
Easy integration of Fibre Channel technology using the PowerEdge™ M1000e blade enclosure, Brocade® M5424 and Dell™ Compellent™ storage.
Fibre Channel ports
- 24 ports universal ports (E_Port, F_Port, and N_Port) available in all three models:
24-port Enterprise Performance Pack Edition (includes eight pre-installed 8Gb SFP+ transceivers) plus Enterprise software licenses for Adaptive Networking, ISL Trunking, Fabric Watch, and Advanced Performance Monitoring
24-port model (includes four pre-installed 8Gb SFP+ transceivers)
12-port model (includes two pre-installed 8Gb SFP+ transceivers) – upgradeable to 24-port model through optional 12-port upgrade license kit
Scalability
- Full fabric architecture with 239 switches maximum
Certified maximum
- Single Brocade FOS fabric: 56 domains, 19 hops Single Brocade M-EOS fabric: 31 domains, 3 hops Larger fabrics certified as required; consult Brocade or OEM SAN design documents for configuration details
Interoperability
- Brocade 2XXX, 3XXX, 4XXX, 5XXX and Director family switches. AG Mode supports Brocade, McData and Cisco fabrics
Performance
- 8.5 Gbit/sec line speed, full duplex;
4.25 Gbit/sec line speed, full duplex;
2.125 Gbit/sec line speed, full duplex
1.063 Gbit/sec line speed, full duplex;
auto-sensing of 8, 4, 2, and 1 Gbit/sec port
speeds; optionally programmable to fixed port
speed; speed matching between 8, 4, 2, and
1 Gbit/sec ports
ISL Trunking
- Inter-Switch Link (ISL) Trunking allows all eight external SAN ports to be combined to form a single, logical ISL with an aggregate bandwidth of 64Gb delivering scalable I/O bandwidth utilization and load balancing.
Aggregate bandwidth
- 384 Gbit/sec end-to-end (full duplex)
Fabric latency
- 700 ns with no contention, cut through routing at 8 Gbit/sec
Maximum frame size
- 2112-byte payload
Classes of Service
- Class 2, Class 3, Class F (inter-switch frames)
Port Types
- FL_Port, F_Port, M_Port (Mirror Port), and E_Port; self-discovery based on switch type (U_Port); optional port type control in Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port
Data Traffic Types
- Fabric switches supporting unicast and broadcast
Media Types
- 8 Gbit/sec: Requires Brocade hot-pluggable
SFP+, LC connector; 8 Gbit/sec
Short-Wavelength Laser (SWL); 8 Gbit/sec
Long-Wavelength Laser (LWL); distance depends on fiber-optic cable and port speed
4 Gbit/sec: Requires Brocade hot-pluggable
Small Form-factor Pluggable (SFP), LC connector; 4 Gbit/sec
Short-Wavelength Laser (SWL); 4 Gbit/sec
Long-Wavelength Laser (LWL); 4 Gbit/sec
Extended Long-Wavelength Laser (ELWL); distance depends on fiber-optic cable and port speed
Fabric Services
- Simple Name Server (SNS); Registered State Change Notification (RSCN), NTP v3, Reliable Commit Service (RCS), Dynamic Path Selection (DPS), Brocade Advanced Zoning (default zoning, port/WWN zoning, broadcast zoning), NPIV, and FDMI
NOTE: Some fabric services do not apply or are unavailable in Brocade Access Gateway mode
Options
- 4Gb SFP & 8Gb SFP+ transceivers (single pack)
Ports on Demand (12-port license upgrade kit - for 12-port model only)
Enterprise Performance Pack : Software option for 12-port and 24-port models that includes Adaptive Networking, ISL Trunking, Fabric Watch, and Advanced Performance Monitoring)
ISL Trunking: Software option for 12-port and 24-port models
Management
- Supported Mgmt Software
Telnet, HTTP, SNMP v1/v3 (FE MIB, FC Management MIB); Auditing, Syslog, Change Management tracking; EZSwitchSetup wizard;
Brocade Advanced Web Tools; Brocade DCFM Professional/Enterprise; SMI-S compliant, SMI-S scripting toolkit, Administrative Domains
Security
SSL, SSH v2, HTTPS, LDAP, RADIUS, Role-Based Access Control (RBAC), DH-CHAP (between switches and end devices), Port Binding, Switch Binding, Secure RPC, Secure Copy (SCP), Trusted Switch, IPSec, IP Filtering
Management access
In-band over Fibre Channel; serial port (RJ-45); call-home integration enabled through Brocade DCFM
Diagnostics
POST and embedded online/offline diagnostics, including RAStrace logging, environmental monitoring, non-disruptive daemon restart,FCping and Pathinfo (FC traceroute), port mirroring (SPAN port)
Chassis
- Width: 272.75 mm
Height: 32.48 mm
Depth: 307.24 mm
Weight: 4.65 Pounds— without media
Environmental Operating Conditions
- Temperature
Operating: 0°C to 40°C(32°F to 104°F)
Non-operating: -20°C to 70°C(-4°F to 158°F)
Humidity
Operating: 10% to 90%, non-condensing at 29°C
Non-operating: 5% to 95%, non-condensing at 38°C
Operating altitude
Up to 3,048 m (10,000 ft)
Storage altitude
Up to 10.668km (35,000ft)
Operating Shock
20G for 6ms
Non-operating Shock
50G with a velocity change of 4216 mm/sec squared
Vibration
Operating: 0.4G at 5 Hz to 500 Hz for 60 minutes
Non-operating: 0.5G at 2 Hz to 200 Hz for 15 minutes; 1.04 grms random for 15 minutes
Power
- DC Input 12V and 3.3V from chassis
Power consumption About 32 Watts
Highlights
The Brocade® M5424 switch and the Dell™ PowerEdge™ M1000e blade enclosure provide robust solutions for Fibre Channel SAN deployments. Not only does this offering help simplify and reduce the amount of SAN hardware components required for a deployment, but it also maintains the scalability, performance, interoperability and management of traditional SAN environments.
Fast, Reliable 8-Gbit/sec Performance
- Non-blocking and non-oversubscribed platform with an aggregate bandwidth of 128 Gbit/sec end-to-end
- Optional adaptive networking services, including adaptive fabric quality of service, traffic isolation and ingress rate limiting, enabling organizations to maintain optimized application performance in virtual environments
Excellent Value for a Variety of SAN Environments
- Easily integrate Fibre Channel (FC) technology into new or existing Storage Area Network (SAN) environments using the PowerEdge M1000e blade enclosure, Brocade® M5424 and Dell/EMC storage.
- New platform combines with Brocade® 8Gb edge switches from Dell to extends the next generation dynamic Data Center Fabric features of Brocade® backbone DCX architecture to the Dell PowerEdge M1000e Chassis.
Navigate network complexity with Dell EMC Services
Our global team of network experts understands the complexities of IT ecosystems, including multi-vendor environments. We have the skillset and experience to not only quickly resolve performance issues but also transform your network to meet the demands of your business.
Consulting
Dell EMC network consultants provide expert guidance to help you optimize and transform the network environment for the demands of today’s multi-cloud infrastructures. Our deep infrastructure and application expertise combined with sophisticated network analysis toolsets address a wide range of network technology and process challenges.
Deployment
Leverage the Dell EMC ProDeploy Enterprise Suite to get your network installed and configured. Our experts can free your IT staff to focus on your core business, minimize downtime and give you the confidence that the job will be done right, the first time.
Support
Gain access to ProSupport technical experts who can assist with your most complex networking challenges. The Dell EMC ProSupport Enterprise Suite provides networking support around the clock and around the globe, helping your team maintain a high level of productivity.
Education
Dell EMC offers flexible training programs so your staff can build the right skills to successfully manage and utilize your network to its full potential. Through our personalized approach, your staff gets the exact training they need to improve productivity and adoption, decrease downtime, and reduce end-user support calls.
