This post is more than 5 years old
3 Posts
0
1359659
Vostro 200 CPU Upgrade
Does anybody have a CPU compatibility list for the Vostro 200? I've fallen back on the computer knowledge curve and find so many processors available. Right now it has an E2140 and I'm looking at something like the E6300 - a bit faster and not too expensive. I see one at Newegg for $78 with free shipping. TIA
shesagordie
10 Elder
10 Elder
•
46K Posts
5
March 22nd, 2013 08:00
RichCal
First you need to determine, the motherboard version your Vostro 200 has and was your system shipped with a 300w, or a 350w power supply?
As already stated the Vostro 200 was built with two different motherboards, either a G33M02, or G33M03.
If your Vostro 200 was purchased with either a Core 2 Duo, Pentium Dual-Core or Celeron processor and a 300w power supply, this system usually has a FoxConn G33M02 motherboard, that only supports Core 2 Duo, Pentium Dual-Core and Celeron processors.
If you have a Core 2 Quad processor and a 350w power supply, you have the FoxConn DG33M03 motherboard.
This motherboard can be used for both Quad 4 & Core 2 Duo processors.
Bev.
shesagordie
10 Elder
10 Elder
•
46K Posts
4
March 22nd, 2013 10:00
RichCal
The following are largest Core 2 Duo processors supported by the Vostro 200 MT:
Wolfdale Dual Core E7300, 2.66, 3MB, 65W, M0
Wolfdale Dual Core E8190, 2.66G, 6MB, 1333FSB, 65Watt, C0
Wolfdale Dual Core E8200, 2.66G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core E8300, 2.83G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core E8400, 3.00G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core E8400, 3.00G, 6MB, 1333FSB, 65W, E0
Wolfdale Dual Core E8500, 3.16G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core E8500, 3.16G, 6MB, 1333FSB, 65W, E0
Wolfdale Core 2 Duo, E8600, 3.33GHz, 6MB, 1333FSB, 65W, E0
Before installing the processor, you need to upgrade the BIOS to version 1.0.16, or higher, as support for new Intel CPU's was added.
I have the E8400 Core 2 Duo installed in my Inspiron 530 MT, together with the Radeon HD 7750 video card.
Bev.
shesagordie
10 Elder
10 Elder
•
46K Posts
1
February 4th, 2015 15:00
Maximusmarcus
If the Vostro 200 boots without errors with the e8600 CPU and the old RAM, try the following:
Remove all the 'old' memory modules, then install only one 'New' 2gb module in slot 1 and see if the system boots and if the computer starts normally, then install an additional module and reboot
Does not boot, move the module to slot 2 and again see if the system boots, no boot, try the module in slot 3, no boot, try installing in slot 4.
Still does not boot, then remove the first module and using the second 2gb module, repeat the sequence described above.
Still no boot, try installing any remaining modules, one at a time, using the above procedure.
Continue until you have identified any faulty module [or slot] or reinstalled all modules without error.
Still does not boot, buy new compatible memory modules and try that.
Bev.
shesagordie
10 Elder
10 Elder
•
46K Posts
0
August 4th, 2015 16:00
george.hilliker
George,
Yep, buying a new ATX case is the smart and easier option.
I have been building my own desktops for many years, yes I know they can cost more, it is far less aggro, than dealing with the OEM computer manufacturers. But the downsize is that you must be able to service and troubleshoot them yourself, in other words, be your own Tech Support.
Bev.
DELL-Chris M
Community Manager
Community Manager
•
54.2K Posts
1
September 19th, 2009 18:00
F886J Yorkfield Quad Core, Q9550, 2.83G, 12MB, 1333FSB, E0
N650J Yorkfield Quad Core, Q9400, 2.66G, 6MB, 1333FSB, R0
D923J Wolfdale Dual Core, E8500, 3.16G, 6MB, 1333FSB, 65W, E0
Y934C Wolfdale Dual Core, E8500, 3.16G, 6MB, 1333FSB, 65W, C0
Y935C Wolfdale Dual Core, E8400, 3.0G, 6MB, 1333FSB, 65W, C0
H399J Wolfdale Dual Core, E8400, 3.0G, 6MB, 1333FSB, 65W, E0
K905F Wolfdale Dual Core, E8300, 2.83G, 6MB, 1333FSB, 65W, C0
Y932C Wolfdale Dual Core, E8200, 2.66G, 6MB, 1333FSB, 65W, C0
Y442H Wolfdale Dual Core, E7300, 2.66, 3MB, 65W,M0
MP628 Conroe Kit, E6850, 3.0G, 4MB, 1333FSB, G0
MP162 Conroe Kit, E6750, 2.66G, 4MB, 1333FSB, G0
PN416 Conroe Kit, E6700, 2.66G, 4MB, 1066FSB, B2
KU345 Conroe Kit, E6600, 2.4G, 4MB, 1066FSB, B2
MP160 Conroe Kit, E6550, 2.33G, 4MB, 1333FSB
DX484 Conroe Kit, E6420, 2.13G, 4MB, 1066FSB, B2
DX485 Conroe Kit, E6320, 1.86G, 4MB, 1066FSB, B2
Y933C Conroe Kit, E4700, 2.6G, 2MB, 800FSB, G0
CY593 Conroe Kit, E4600, 2.4G, 2MB, 800FSB, M0
MP159 Conroe Kit, E4500, 2.20G, 2MB, 800FSB, M0
DX483 Conroe Kit, E4400, 2.00G, 2MB, 800FSB, L2
RX522 Conroe Kit, E4400, 2.00G, 2MB, 800FSB, M0
HU587 Conroe kit, E4300, 1.8G, 2MB, 800FSB, L2
RX391 Conroe Kit, E2180, 2.0G, 1MB, 800FSB, M0
YU563 Conroe Kit, E2160, 1.8G, 1MB, 800FSB, M0
XT481 Conroe Kit, E2160, 1.8G, 1MB, 800FSB, L2
XT482 Conroe Kit, E2140, 1.6G, 1MB, 800FSB, L2
YU562 Conroe Kit, E2140, 1.6G, 1MB, 800FSB, M0
XT483 Celeron Kit, 440, 2.0G, 512KB, 800FSB, A1
XT484 Celeron Kit, 430, 1.8G, 512KB, 800FSB, A1
XT485 Celeron Kit, 420, 1.6G, 512KB, 800FSB, A1
Y931C Pentium Conroe Kit, E2200, 2.20G, 1MB, 800FSB, M0
shesagordie
10 Elder
10 Elder
•
46K Posts
0
September 19th, 2009 18:00
parrotheadpete
Reading the discussion HERE should help with the Vostro 200 processor upgrade.
Prior to installing the processor, you need to upgrade the BIOS to latest version 1.0.15.
Bev.
parrotheadpete
3 Posts
0
September 20th, 2009 17:00
Thanks very much for the info. I ordered an E8500 so we'll see how it goes soon. I ordered the "retail" version so I may have heat-sink / fan issues, but I can work around that. This old 200 may be around for a couple more years.
parrotheadpete
3 Posts
0
September 24th, 2009 20:00
The E8500 installed flawlessly with the stock heat sink and fan. The Vostro 200 runs just as quiet but much "snappier". Thanks for the info!
shesagordie
10 Elder
10 Elder
•
46K Posts
0
September 24th, 2009 21:00
parrotheadpete
Thank's for the heads up and it's great to hear that the upgrade went well. :emotion-21:
Bev.
UnstableMable
10 Posts
0
March 28th, 2011 12:00
dm8528
5 Posts
0
March 28th, 2011 13:00
Chris - So, from your list,
I have a Processor, 440, 2.0, 512KB Celeron, A1
So, i can go to any of the 800 Mhz CPU's for my vostro 200 tower?
Is there an updated list? I noticed that you posted the last list in 09'.
Thanks,
shesagordie
10 Elder
10 Elder
•
46K Posts
0
March 29th, 2011 10:00
UnstableMable
:emotion-21:
Bev.
UnstableMable
10 Posts
0
March 29th, 2011 10:00
shesagordie replied to Re: vostro 200 ram upgrade in Desktop General Hardware Forum.
UnstableMable
Both Dell and Crucial state the Vostro 200 supports 4gb of DDR2 RAM, see HERE
But, to use 4gb+ of RAM you need 64-bit operating system, 3±gb is all a 32-bit system can address.
Bev.
Capture this thread to a wiki.
Thanks Bev
Will try 4gb+ with Windows 7 64-bit
Thanks again for your help
UnstableMable
10 Posts
0
March 31st, 2011 05:00
Just to confirm that I've installed the Intel E5700 3GHz CPU mentioned above in my Vostro 200 and it is great.
Upgrade your BIOS to 1.0.16 , install the E5700 and you'll be running at 3 GHz for only 50.00 GBP
Note: The E5700 is a recent Intel release so it is not on the list above (it was released after the list was published).
shesagordie
10 Elder
10 Elder
•
46K Posts
0
March 31st, 2011 07:00
UnstableMable
Appreciate the heads up on the E5700.
Great info,.
Bev.