DUCCS Downloads

DUCCS qualified monitors (UP3218K, UP3216Q, UP3214Q, UP3017, U3014, UP2718Q, UP2716D, UP2715K, U2713H, UP2516D, UP2414Q, U2413) have specific DUCCS version on their specific drivers page.

DUCCS qualified monitors (UP3218K, UP3216Q, UP3214Q, UP3017, U3014, UP2718Q, UP2716D, UP2715K, U2713H, UP2516D, UP2414Q, U2413) have in their OSD (On Screen Display) -Color/Color Settings -Preset Modes, two color spaces called CAL1 and CAL2. You would use these two color spaces to "save" the X-Rite i1 Display Pro colorimeter hardware calibrations into the monitor.

For monitors that do not have hardware calibration capability, DisplayCAL is a good software choice.

* Once DUCCS is installed, use the Application Info: "Check for update now" button to update to the latest version. Check the changes log to verify that your monitor model is supported in the new version. When done, restart the computer
* Press the Menu button to open monitor OSD (On Screen Display)
- Go to Other Settings- Factory Reset- Reset All Settings
- Go to Displays or Display Settings and disable DP 1.2/MST
- Go to Color Settings- Preset Modes
* Choose Color Space
- Highlight/check either Cal1 or Cal2
* Exit the OSD
* The monitor USB upstream cable must be connected to the computer USB port
* In a two or more monitor setup, only ONE monitor should be connected to the computer at a time when calibrating
* The X-Rite i1 Display Pro colorimeter should be tested in TWO ways =
Test it on all of the computer USB downstream ports
Test it on all of the monitor bottom USB downstream ports