This post is more than 5 years old
2 Posts
0
19472
December 1st, 2014 13:00
U24214H will recognize DisplayPort cable after setting “DisplayPort 1.2” to Enable
i am connecting 2 U24214H monitors to my MacBook Pro - mini DP out to DP in then DP out to mini DP into the 2nd monitor. i enabled “DisplayPort 1.2” and now both screens do not recognize either DisplayPort cable. how can i reset to disable “DisplayPort 1.2”?
No Events found!
douglasjmccarth
2 Posts
0
December 1st, 2014 13:00
found the solution thanks to AdrianMT and
Follow these steps to disable DP1.2 on the U2414H with NO signal input
Buttons =
Preset, Brightness, Menu, Exit, Power
When you press the Menu button, the buttons then are =
Up arrow, Down arrow, Check OK, Back, Power
* Turn off the monitor
* Unplug all video input cabling from the U2414H
* Turn on the monitor
* Press the Menu button
* Press the Check OK button (3rd from left) and HOLD for 15 seconds
* Then disable DP 1.2