Networking General

[dj82]

I have dell powerconnect 2000 and 3000 series switchs and wanting to know if i can pull Transceiver information via SNMP

# show interfaces tengigabitethernet 1/0/5 transceiver detail

Type.............................. SFP+
Media............................. 10GBASE-LR

< Private Chassis serial number removed.TOS73>

Dell EMC Qualified................ Yes
Data Rate......................... multirate
Wavelength........................ 1310
Receive Power..................... -3.13

[DiegoLopez]

Hello @dj82,

Here you have the cli guide for N2000 series and N3000 series https://dell.to/3sVVYx8

Also some commands will need you to have the firmware updated to be able to use them. As you can see in the SNMP command section there is not any command related to the transceivers.

Regards.