Start a Conversation

Solved!

Go to Solution

2694

November 1st, 2021 21:00

R740 Drive bay upgrade

A big hello to this amazing community. This is my first post.
 
I have a Dell R740 Server (2018 model).
 
This server came installed with an 8 drive SAS front bay (SFF). Can I add an additional cages and controller to increase the number of SAS SSD's from 8 to 24?
 
What are the part nos for the upgrade - cage/bay, cable, controller?

130 Posts

November 2nd, 2021 16:00

No, you cant change the drive bay configuration. Each drive bay configuration is a different physical chassis, which requires a specific backplane. The drive bays are riveted/welded into place and arent removable. This is true for all PowerEdge servers. 

#Iwork4Dell

Moderator

 • 

278 Posts

November 2nd, 2021 02:00

Hello Mandeep.sjs,

 

Thank you for choosing Dell.

I've checked documentation and would like to share with you possible front hard-drive configurations for PowerEdge R740:

 

8 x 2.5 -inch hard drive configuration

16 x 2.5 -inch hard drive configuration

8 x 3.5 -inch hard drive configuration

 

Source: https://dell.to/3mCeOq1 p.12

 

Please ask me if you have any questions.

Thank you

Maria Januszka

#IWork4Dell

Dell | Social Outreach Services - Enterprise

November 2nd, 2021 22:00

This is surprising but true!

Response from Dell support:

"server can maximum take up to 8 HDD only. You cannot install more than that. If storage space is a concern then you need to install higher capacity drivers in available 8 slots."

Moderator

 • 

3.1K Posts

November 3rd, 2021 00:00

Hi @Mandeep.sjs,

 

Yes, unfortunately to upgrade the server's slot to higher amount, needs various hardware changes and it is almost impossible. 

1 Message

May 26th, 2022 22:00

A big hello to this amazing community.
 
I have a Dell poweredge R740 Server.
 
This server was installed with an 8 drive SAS front bay (SFF). All the drives together is 96TB, 12Tb in each bay operating on RAID5. Am currently running out of space. How Can I add an additional cages drive to increase the number of SAS SSD's from 8 to 9 or 10 to get more space? What re the requirements? 
 
What are the part nos for the upgrade - cage/bay, cable, controller?

Moderator

 • 

3.1K Posts

May 27th, 2022 02:00

Hi @Omoakin,

 

Do you happen to know what backplane do you use in your server? Would it be a 16 drive or 8 drive backplane? If you're using a 16 drive backplane, then you need to check what is the drive specification that you use and locate the correct same drive specification here: https://dell.to/3N0Gz6I. Alternative, it's preferable to contact sales support to confirm the availability of drives.

 

If you're using a 8 drive backplane, as I check in the user guide, there is no expansion or method to add another 8 drive backplane next to the existing one. https://dell.to/3lKHn3w

No Events found!

Top